电竞竞猜app哪个好

你好,欢迎来到广东顺德钢准金属材料有限公司官网

高品质钢板加工配送服务

24小时服务热线 13380228696 主营:镀锌板、电解板、镀铝锌板、彩涂板
当前位置:电竞竞猜app哪个好 >   新闻资讯>钢材知识>  镀层的结合机理小结

镀层的结合机理小结

发布时间:2019-01-02 点击数:278


镀层的结合机理小结


1) 机械镀锌层和基体之间存在明显的界面,形成镀层过程没有产生扩散层、合金化层等过渡层。镀层和基体间的结合强度较低,约为2 ~ 3MPa。随着镀层厚度的增加,镀层的抗冲击性能提高。镀层与基体间的结合方式以机械咬合为主,存在少量的金属键合。机械镀锌层和基体之间分布有少量的金属锡,有助于提高镀层与基体间的结合强度。



2)镀层内锌粉颗粒间的结合是因为锌粉颗粒表面受玻璃丸介质反复作用产生了细小碎晶,相邻颗粒接触面发生细晶咬合,增加了锌粉之间的有效结合面积,结合主要以机械结合为主,镀层中存在少量的金属键结合。


电竞竞猜app哪个好 3)机械镀锌过程产生的锡和铁不影响镀层内锌粉颗粒之间的结合。机械镀锌过程添加非锌微粉、稀土等不影响镀层与基体间、镀层内锌粉颗粒间的结合机制。


4)镀后加热不改变镀层与基体间、镀层内锌粉颗粒间的结合机制,只起到干燥和消除应力的作用。


电竞竞猜app哪个好 5)强化不改变镀层与基体间、镀层内锌粉颗粒间的结合机制,延长强化时间镀层与基体界面及镀层内不会发生扩散、冶金反应等合

1) There is an obvious interface between mechanical galvanizing layer and matrix, and no transition layer such as diffusion layer and alloying layer is formed during the process of coating formation. The bonding strength between coating and matrix is low, about 2 ~ 3 MPa. With the increase of coating thickness, the impact resistance of the coating is improved. The bonding mode between coating and matrix is mainly mechanical occlusion, with a small amount of metal bonding. A small amount of tin is distributed between the mechanical zinc coating and the substrate, which helps to improve the bonding strength between the coating and the substrate.
2) The bonding between zinc powder particles in the coating is due to the repeated action of glass pellet medium on the surface of zinc powder particles, the fine grain occlusion occurs on the contact surface of adjacent particles, which increases the effective bonding area between zinc powder. The bonding is mainly mechanical bonding, and there is a small amount of metal bonding in the coating.
3) Tin and iron produced during mechanical zinc plating do not affect the bonding of zinc powder particles in the coating. The addition of non-zinc micro-powder and rare earth in mechanical galvanizing process does not affect the bonding mechanism between coating and matrix, and between zinc particles in coating.
4) Heating after plating does not change the bonding mechanism between coating and matrix or between zinc powder particles in the coating, but only plays the role of drying and eliminating stress.
5) Strengthen does not change the bonding mechanism between coating and matrix, zinc powder particles in the coating, prolong the strengthening time, and there will be no diffusion and metallurgical reaction in the interface between coating and matrix and in the coating.


钢准金属 & 钢铁3Q服务

钢准金属专注镀锌板加工配送,6年行业经验,只为提供高品质钢板加工配送服务

行业资讯镀锌板今日价格,更多服务细节,欢迎您来咨询,13380228696(微信同号)

钢准金属官网 kidternet.com

钢准阿里巴巴旺铺 gzhmetal.1688.com




相关资讯:


标题:镀层的组织结构特征:传统的电镀锌层和热浸镀锌层结晶方法

标题:镀层的结合机理

标题:测定镀锌层的结合强度??镀层结合强度的测定

在线客服


钢准logo 服务二维码 联系我们
24小时服务热线 13380228696 分享到:

友情链接:

公司主营:无花镀锌板、有花镀锌板、热浸镀锌钢板、镀铝锌板、镀锌卷板

公司地址:广东省佛山市顺德区乐从镇乐从大道金宇名都商业街13号   销售热线:0757-28368601    © 广东顺德钢准金属材料有限公司 2018 All Rights Reserved.   技术支持:

返回顶部